1 Color Micro-adjust Screen Printer with Precision Press Head. Screen frame is not included with this printer. Suitable for all kinds of flat product printing, such as electronic circuit board, paper box, glass, board, metal plate. All kinds of plastic board, etc. Do not recommend to use this machine for cloth, ribbons, s. Paper, thin plastic sheets and other light materials. (These materials are too thin, after printing, the screen frame may stuck with the plate then mess up the printing result). Paper, thin plastic sheets and other lighter materials are recommended to use vacuum screen pallet. Cloth, ribbon, and other textile printing is recommended to use the wooden pallet with glue. Printing head is micro adjustable in three-directions, it can be moved in 4 directions by moving the knob within 3/4 inch. This machine is equipped with three gravity balance plates, which can be installed individually or together according to the request. The gravity balance plate can move forward and backward in 4 inch. With the screws under the balance frame, the lifting angle and height of the screen frame can be adjusted as required. Equipped with full set installation tools. Height adjustment: Place the screen frame flat on the platform. According to the substrate height or printing requirements, rotate the handle up & down to reach an appropriate height, then lock the height with the two rear positioning handles. Left and right adjustment: loosen the handle on both sides of the press, and rotate the handle to move slightly left and right as required, after adjustment tighten both handles. Back and forward adjustment: First, slightly loosen that four red knobs overhead the clamp, then loosen the metal knobs on both sides of the clamp and move front and rear as required. After adjusting, tighten the metal knobs and four red knobs on the top. Raw material: 3mm stainless steel plate. Clamp size: 11″ x 3″ (width x height). Suggest max screen frame size: 13″ x17″ x 2. Pallet size: 17.7″ x 14″ (46×30 cm). Item include: 1 Color Micro-adjust Screen Printer with Precision Press Head—006590. Orders are processed from Monday-Friday; Not on the weekends & public holidays. We will work with you to get the case resolved in the fastest method. Hope for your understanding. Please contact with us at first for more details. Defective & Damaged Products. If product was received damaged or not as described, please send us some pictures or videos, so we could well understand your problem, then solve them for you ASAP. Besides, it’s much helpful for us to claim with UPS, remind our related department to pay much more attention to packaging later on. If an item is received damaged, customer service must be contacted within 7 days of receiving your item. Payments via eCheck do not clear immediately. Usually you will wait 5-7 days after checkout for it to clear. The item “PCB Screen Printing Press Machine Silk Press Printer for Circuit Board Print” is in sale since Wednesday, December 4, 2019. This item is in the category “Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Screen Printing”. The seller is “ascpress” and is located in Rancho Cucamonga, California. This item can be shipped to United States.
- MPN: 006590
- Brand: Unbranded