NSEE-DW329-04-220V-AC-PK1600-Circuit-Control-Board-PCB-Slide-Gate-Door-Operator-01-suag NSEE DW329-04 220V AC PK1600 Circuit Control Board PCB Slide Gate Door Operator

NSEE DW329-04 220V AC PK1600 Circuit Control Board PCB Slide Gate Door Operator
Swing Gate Control Panel. Application:Used for AC slide gate opener. Board Memory: 120 rolling code transmitters. Frequency: 433.92mhz (other frequency customized). Output Voltage: AC 220V. Auto-closing time can be adjusted from 1 second to 99 seconds. Terminals available for photocell, push button, keypad, access control equipment etc. Custom rolling code makes the system more secure. All slide operators that uses the same board. Our NSEE Swing operators. THIS IS AVAILABLE IN 110V AC IF NEEDED PLEASE SEND US A MESSAGE FOR AVAILABILITY. Single button can finish all the control command(such as close, open, stop). Can delete any remote control separately. Can adjust the working time of motor. Can program the time of auto close. Can set auto close when restored power after power off. With infrared detection connector. 1 for magnetic limit switch input. 2 for motor wire input. 3 for power input. 4 for adjusting the torque force. 5 for for adjusting closing force. 6 dip switch for multi function setup. 7 is learning button to program remote control(press learn button, then press any key of remote control two times to add remote controls). 8 is testing button to test the motor. 9 for change the motor running direction. 10 for flashing lamp input. 11 is remote control receiver. 12 for photocell, manual button, keypad and gsm input. The item “NSEE DW329-04 220V AC PK1600 Circuit Control Board PCB Slide Gate Door Operator” is in sale since Thursday, January 24, 2019. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Garage Doors & Openers\Opener Systems”. The seller is “gate-hardware-and-equipments” and is located in Opa-Locka, Florida. This item can be shipped worldwide.
  • Model: DW329-04
  • MPN: DW329-04
  • Brand: NSEE
  • Application: Commercial
  • Power Source: Electric
  • Type: Replacement Slide Control Board DW329-04 220V
  • Voltage: 220V

NSEE DW329-04 220V AC PK1600 Circuit Control Board PCB Slide Gate Door Operator
NSEE-EG20-24V-DC-Circuit-Control-Board-PCB-Automatic-Swing-Gate-Door-Operator-01-xn NSEE EG20 24V DC Circuit Control Board PCB Automatic Swing Gate Door Operator

NSEE EG20 24V DC Circuit Control Board PCB Automatic Swing Gate Door Operator
Single button can finish all the control command (such as close, open, stop). Can delete any remote control separately. Can adjust the working time of motor. Can adjust the output power of motor. Can program the time of auto close. Can set auto close when restored power after power off. With infrared detection connector. Potentiometer for adjusting high speed period of opening and closing. Turn clockwisely to increase high speed period during opening and closing; turn counter-clockwisely to decrease high speed period during opening and closing. Minimum value of high speed period is 0 second and swing gate opener will always work in low speed, maximum value of high speed period is 33 seconds and swing gate opener will always work in high speed. Potentiometer for adjusting interval time of close between motor1motor2. Turn clockwisely to increase interval time of closing between motormotor2; turn counter -clockwisely to decrease interval time of closing between motormotor2. Minimum value of interval time of close between 2 gate leaves is 0 second and 2 gate leaves will close at the same time, maximum value of interval time of close between 2 gate leaves is 33 seconds and the gate with motor2 will close in 33 seconds after the gate with motor1 closed. The interval time of open between motor1motor2 is always 1 seconds not adjustable. Potentiometer for adjusting auto closing time delay. Turn clockwisely to increase auto closing time delay; turn counter-clockwisely to decrease auto closing time delay. Minimum value of auto closing time delay is 0 second and auto closing function disabled, maximum value of auto closing time delay is 33 seconds and gate will auto close in 33 seconds, if previous operation is single gate, then single gate auto close; if previous operation is double gate, then double gate auto close. Potentiometer for adjusting force of motor2. Turn clockwisely to increase the force of motor2; turn counter-clockwisely to decrease the force of motor2. Potentiometer for adjusting force of motor1. Turn clockwisely to increase the force of motor1; turn counter-clockwisely to decrease the force of motor1. VCC terminal is DC 24V on board power supply for external devices. COM terminal is COMMON used for connecting the ground of external devices. Infrared terminal is used for connecting photo electric sensor. Swipe Card terminal is used for connecting any external devices that will operate to open the gate. Lock terminal is used for connecting external electric lock for security. UPS terminal is used for connecting the back up battery(12V 7AH recommend). Connecting transformer output wires. 24V-12 connects blue wire from transformer. 12V-0V connects yellow wire from transformer. 0V-12V connects black wire from transformer. Moto2 Delay terminal is used for connecting the motor 2 installed on the gate that opens first and close later. The connecting order of 2 wires 1st blue wire 2nd red wire(counted from your left hand side to right hand side). Moto1 terminal is used for connecting the motor 1 installed on the gate that opens later and close first. The connecting order of 2 wires 1st red wire 2nd blue wire(counted from your left hand side to right hand side). 1 SIDE terminal is used for connecting any external device that operates single gate. 2 SIDE terminal is used for connecting any external device that operates double gate. Alarm Lamp terminal connects flash light. The flash light is on when the motor is working. Need to add one more wire to get power supply from VCC terminal or Transformer output to this socket. Button 1 depressed to operate single gate; button 2 depressed to operate double gate. Program new remote control. Press LEARN button on control board for about 1 second. Then blue indicator on board goes off. Press any button on the new remote control for about 2 seconds, then blue indicator on board starts flashing, it means now new remote control programmed successfully. Press and hold LEARN button on control board for about 3 seconds, the blue indicator on board goes on, it means now all the programmed remote controls have been removed from board. The item “NSEE EG20 24V DC Circuit Control Board PCB Automatic Swing Gate Door Operator” is in sale since Sunday, August 27, 2017. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Garage Doors & Openers\Opener Systems”. The seller is “gate-hardware-and-equipments” and is located in Opa-Locka, Florida. This item can be shipped worldwide.
  • Model: EG20
  • MPN: EG20
  • Brand: NSEE
  • Application: Commercial
  • Type: 24V Circuit Control Board Swing Gate Door

NSEE EG20 24V DC Circuit Control Board PCB Automatic Swing Gate Door Operator
NSEE-EG22A-24V-DC-Circuit-Control-Board-PCB-Automatic-Swing-Gate-Door-Operator-01-zfx NSEE EG22A 24V DC Circuit Control Board PCB Automatic Swing Gate Door Operator

NSEE EG22A 24V DC Circuit Control Board PCB Automatic Swing Gate Door Operator
Swing Gate Control Panel. Application:Used for DC swing gate opener. Board Memory: 120 rolling code transmitters. Frequency: 433.92mhz (other frequency customized). Output Voltage: DC 24V. Digital LED Menu brings a easy setting, plug and play. Open/Close single leaf or double leaves. Separate force setting for motor 1, motor 2 and high speed, slow speed brings the motors working accurately. Auto-closing time can be adjusted from 1 second to 99 seconds. Total 60s working time to protect the motors. Terminals available for loop detector, photocell, push button, keypad, access control equipment etc. Compatible with both electric lock and electromagnetic lock. Extra relay out put for lock of pedestrian door or other external devices. Custom rolling code makes the system more secure. Available to connect back up battery or solar system. All swing operators that uses the same board. Our NSEE Swing operators. 1 SIDE terminal is used for connecting any external device that operates single gate. COM terminal is COMMON used for connecting the ground of external devices. 2 SIDE terminal is used for connecting any external device that operates double gate. Swipe Card terminal is used for connecting any external devices that will operate to open the gate. Infrared terminal is used for connecting photo electric sensor. 12V DC output is used for connecting photo electric sensor Continuous output current. 24V battery output is used for connecting the back up battery +. 24V battery output is used for connecting the back up battery. 24V DC output is used for connecting external device. (such as photo electric sensor, max current output 1A). GND is used for connecting the ground of external devices. 24V DC lamp output is used for connecting flash light +. 24V DC lamp output is used for connecting flash light. 24V DC lock outputthe NF terminal which used for connecting the electromechanical lock. COM is COMMON used for connecting the ground of lock. 24V DC lock outputthe NA terminal which used for connecting the magnetic lock. 24V DC alarm output. Motor1 terminal is used for connecting the motor 1 installed on the gate that opens later and close first. This terminal connect 1. Red wire (counted from your left hand side to right hand side). This terminal connect 2. Blue wire (counted from your left hand side to right hand side). Motor2 Delay terminal is used for connecting the motor 2 installed on the gate that opens first and close later. If for single gate, the gate motor just can connect the Motor2 Delay terminal. AC24V input is used for connecting the transformer. Digital display is used for showing you the setting data. INC+ is used for figure increase when setting the data. FUN is used for store the data. DEC- is used for figure decrease when setting the data. Learning button is used for program/remove remote. This swing board mainly used for following swing operators. The item “NSEE EG22A 24V DC Circuit Control Board PCB Automatic Swing Gate Door Operator” is in sale since Sunday, August 27, 2017. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Garage Doors & Openers\Opener Systems”. The seller is “gate-hardware-and-equipments” and is located in Opa-Locka, Florida. This item can be shipped worldwide.
  • Model: EG22A
  • MPN: EG22A
  • Brand: NSEE
  • Application: Commercial
  • Type: Circuit Control Board PCB Automatic Swing Gate

NSEE EG22A 24V DC Circuit Control Board PCB Automatic Swing Gate Door Operator
NSEE-PK300DC-24V-DC-Circuit-Control-Board-PCB-Automatic-Swing-Gate-Door-Operator-01-ybpf NSEE PK300DC 24V DC Circuit Control Board PCB Automatic Swing Gate Door Operator

NSEE PK300DC 24V DC Circuit Control Board PCB Automatic Swing Gate Door Operator
Single button can finish all the control command(such as close, open, stop). Can delete any remote control separately. Can adjust the working time of motor. Can adjust the output power of motor. Can program the time of auto close. Can set auto close when restored power after power off. With infrared detection connector. The item “NSEE PK300DC 24V DC Circuit Control Board PCB Automatic Swing Gate Door Operator” is in sale since Monday, March 19, 2018. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Garage Doors & Openers\Opener Systems”. The seller is “gate-hardware-and-equipments” and is located in Opa-Locka, Florida. This item can be shipped worldwide.
  • Model: PK300DC 7F220235K1
  • Type: PK300D Replacement Control Board PCB
  • MPN: PK300DC 7F220235K1
  • Brand: NSEE
  • Application: Commercial

NSEE PK300DC 24V DC Circuit Control Board PCB Automatic Swing Gate Door Operator
NSEE-DW-1206-220V-AC-PK1600-Circuit-Control-Board-PCB-Slide-Gate-Door-Operator-01-ypli NSEE DW-1206 220V AC PK1600 Circuit Control Board PCB Slide Gate Door Operator

NSEE DW-1206 220V AC PK1600 Circuit Control Board PCB Slide Gate Door Operator
Swing Gate Control Panel. Application:Used for AC slide gate opener. Board Memory: 120 rolling code transmitters. Frequency: 433.92mhz (other frequency customized). Output Voltage: AC 220V. Auto-closing time can be adjusted from 1 second to 99 seconds. Terminals available for photocell, push button, keypad, access control equipment etc. Custom rolling code makes the system more secure. All slide operators that uses the same board. Our NSEE Swing operators. Single button can finish all the control command(such as close, open, stop). Can delete any remote control separately. Can adjust the working time of motor. Can program the time of auto close. Can set auto close when restored power after power off. With infrared detection connector. 1 for magnetic limit switch input. 2 for motor wire input. 3 for power input. 4 for adjusting the torque force. 5 for for adjusting closing force. 6 dip switch for multi function setup. 7 is learning button to program remote control(press learn button, then press any key of remote control two times to add remote controls). 8 is testing button to test the motor. 9 for change the motor running direction. 10 for flashing lamp input. 11 is remote control receiver. 12 for photocell, manual button, keypad and gsm input. The item “NSEE DW-1206 220V AC PK1600 Circuit Control Board PCB Slide Gate Door Operator” is in sale since Thursday, November 2, 2017. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Garage Doors & Openers\Opener Systems”. The seller is “gate-hardware-and-equipments” and is located in Opa-Locka, Florida. This item can be shipped worldwide.
  • Model: DW-1206
  • MPN: DW-1206
  • Brand: NSEE
  • Application: Commercial
  • Type: Slide Gate Door Opener Replacement Control Board
  • Voltage: 220V AC

NSEE DW-1206 220V AC PK1600 Circuit Control Board PCB Slide Gate Door Operator

Incoming search terms:

  • nsee dw-1206 220v ac pk1600ns